For over two decades, APPS UK Ltd has dedicated itself to developing bespoke solutions to meet clients’ odour, FOG (Fat, Oil, and Grease), and dust control issues throughout the world.
APPS UK Ltd is a company that provides high quality air pollution product and systems, to respond to our customer’s needs whether it be odour, dust, fat related issues, using environmentally friendly technology. It is imperative to remain responsible for our environmental impact, making all APPS UK Ltd technologies low toxicity and biodegradable along with all systems to be low carbon and energy efficient.
All our systems are specifically tailor-made to meet the necessities for the required location. We believe in developing trust with our customers by tailoring the most reliable and cost effective solutions to their problems, satisfying customer requirements; creating energy efficient, low carbon and cost effective solutions.
Our systems range from stainless steel self-clean nozzles systems, portable/ fixed rotaries, atomisers and independent mobile units allowing us to manufacture systems for various sized locations.
There are no specific industries APPS UK Ltd is limited to, designing and installing systems for various applications; by utilising the experience and knowledge from our team. This enables us to provide applications for any problem the business is faced with, reinforced with consultant support from start to finish.
As a company APPS UK Ltd’s key focus is our customer satisfaction, building our clientele from customer recommendations, based on our quality and dependable products, systems and service and supported by our honest and trustworthy approach to ensure the correct and efficient operation of our systems. We go even further than that; if we are not able to resolve your odour issues we will refund all your capital equipment costs.
Our business methods are also designed to suit our customers’ individual situations with a variety of payment methods covering short or long term rentals, contracts purchases or outright purchases.
DustMac suppressants provide superior dust-control performance, supplied by a water resistant surface coating application. It is used in dust abatement systems to solve health, safety, environmental and PR issues, while helping to increase the productivity and profitability of many operations.
Dust can be generated within the Mining, quarrying, construction and demolition industries through material loading and crushing processes, and can also arise from road traffic or wind blowing on stockpiles.
The range includes tackifiers that bind particles together and encrusting agents that create a solid layer over porous surfaces.
APPS UK Ltd offer pre-trial laboratory screening of products and can use test data to develop customised solutions for encrusting, wind erosion and water erosion.
APPS UK Ltd offer a DustMac application service to ensure that the product is applied correctly to guarantee the full benefit of the products, thus eliminating aggravating dust issues. Using the APPS UK Ltd specially manufactured bowser and scientifically designed nozzles optimises the correct spray pattern therefore reducing the application time, labour costs and reducing the water consumption.
Improved environmental compliance
Unit 3 Paisley Works,
14 Windover Road,
01480 45 88 88
Indoor area, Stand 8
Phone: 01480 458888
Baughans was established in 1990 by the director, Andrew Baughan and will be exhibiting on outside stand 13.
The family-owned company specialises in the manufacture and supply of quality recycling equipment and re-handling attachments.
Based in rural Northamptonshire, Eco Baughans 2000 Ltd’s products are constantly developing to meet the changing needs of the recycling industry.
Having been in the skip hire and waste recycling industry for over 20 years, the British manufacturer recognises the need for low cost screening and recycling equipment for the small to large sized operators.
This working knowledge of the industry provided the necessary background information to design a simple, compact and cost-effective range of screens, picking stations, crushing equipment and attachments to suit most applications and budgets.
Phone: 01327 261810
Bodens Group owns its own haulage fleet with over 40 vehicles, chances are you will have seen one of the company’s lorries on the UK motorway network.
Bodens, which is based in Manchester, are exhibiting at WASTE’18 on stand OS12 at the Warwickshire Event Centre in Leamington Spa on July 5.
The company are also one of the UK’s leading manufacturer and supplier of pet products and manufacture wood-based cat litter, small animal bedding and equine bedding.
The directors saw the great potential in pet products and invested heavily in machinery, which has allowed us to become at the forefront in this area.
The products are distributed all over the world. Our own brands of Smart Cat and Smart Pet are UK market leaders in the pet and equine industries.
Phone: 01942 882667
Boughton Engineering is Britain’s longest established designer and manufacturer of hook loaders, skip loaders and close-coupled trailers for the waste sector.
The West Midlands-based company will be exhibiting on the indoor stand 51 at WASTE ’18 at the Warwickshire Event Centre in Leamington Spa on July 5.
The manufacturing firm have been responsible for many initiatives and innovations in agricultural, forestry, military waste management and related equipment engineering.
The company developed into a specialised vehicle-related engineering group with core activities including waste handling equipment and vehicle conversions.
Phone: 01902 397216
The British Automatic Fire Sprinkler Association (BAFSA) is the UK’s leading professional trade association for the fire sprinkler industry.
The long-established organisation celebrated its 40th anniversary in 2014, and will be exhibiting at WASTE ’18 on Stand 16 at the Warwickshire Event Centre (WEC) in Leamington Spa on July 5.
BAFSA’s members install more than 85% of the sprinkler and watermist installations in the UK. This also includes a significant majority of third-party certified sprinkler installers as well as manufacturers, suppliers, contractors, insurers, the fire and rescue services, and others with an interest in the field.
Increasingly the association has offered a home to smaller companies just entering the market and now represents a large number of companies offering the installation of domestic and residential fire sprinkler systems. Many of the association’s members also design and install watermist systems.
BAFSA is dedicated to making sure sprinkler systems are installed to the highest professional standards.
BAFSA’s primary objectives include providing authoritative information on the benefits of sprinkler systems and how sprinklers can play a significant role in saving life and property from the devastating effects of fire. To this end, BAFSA works closely with the government, fire and rescue service, building control officers, insurers, architects and town planners.
Phone: 01887 829428
As a provider of Total Magnetic Solutions, we have been supplying permanent and holding magnets to a wide range of industries for over 50 years.
We have continued to build our knowledge and expertise during this time and offer a complete range of permanent magnets, a very large range of holding magnets, and design and manufacture dedicated magnetising fixtures and magnetising chargers for our own and customers use.
As a manufacturer of magnets we truly understand them, and can offer advice and design services to help customers optimise their systems, and choose the right magnet for the job. As well as holding many millions of magnets in stock, we manufacture and supply magnets to our customer’s requirements, which we can hold stock for call off.
Our magnets are used in a vast range of industries, from automotive to aerospace, from consumer electronics to university laboratories, and are used in a huge range of products including motors, pumps, sensors and furniture.
Our range of holding magnets includes the most comprehensive range of magnetic catches in Europe, pot magnets for normal and high temperature applications, a range of holding forces and we supply a complete range of switchable and welding magnets for manufacturers.
Our expertise in magnetising equipment means we can supply a standard system, or one tailored to a specific application. Our expertise has helped companies reduce costs by being able to magnetise their products after assembly. We also offer a full range of magnet measuring equipment.
Please feel free to contact us for any advice, or to discuss your requirements.
Indoor area, Stand A
Northbridge Road, Berkhamsted, Hertfordshire, HP4 1EH
C&C Hydraulics Ltd will be exhibiting at WASTE ’18 on indoor stand F at the WEC on July 5.
The show will present C&C the opportunity to present an all-new solution in response to the increasing H&SE driven regulation surrounding manual handling and our shared view that safety pays.
The company will present the Sumo ‘Uni-lift’ mobile utility lift and tipping device which offers a fresh, flexible approach to manual handling challenges which many businesses confront daily.
As well as covering a multitude of wheelie bin sizes the ‘Uni-Lift’s’ 200 kg capacity allows the safe handling of 45 gallon drums with its quick fit adaptor. ‘Uni-lifts’ rugged design combined with 200mm (8’’) pneumatic tyres and low C of G make it suitable for factory and off road conditions.
The combined ‘dead man gate’ and push bar is interlocked and safely positions the operator for visual checks during load manipulation. In addition, the design features variable lift height and separate tip operation, these features deliver the safe and accurate handling of many types of waste.
Accredited with ISO9001:2015, C&C are equipped with CAD design capability and are able to offer a bespoke design facility founded on 25 years of experience in hydraulic equipment manufacture.
The company draws on its extensive experience in supply at component level up to complex turnkey solutions across a multitude of sectors including but not limited to waste, construction, agriculture, transport and access.
Customers can expect a warm welcome to stand F and we look forward to discussing how together we can make the waste, recycling and skip hire industry a safer, more cost effective and profitable business to be.
Phone: 01535 617880
ClearWheels, an innovative wheel and tyre specialist company, will be exhibiting at WASTE’18 on stand 2 to reach out to a wider audience and create new and exciting business propositions.
ClearWheels provide a safe, quick and cost-saving solution to removing trapped debris from between twin wheels.
More specially, ClearWheels is a device designed to solve a costly and inconvenient nationwide issue and allows drivers to quickly and safely remove trapped debris between HGV wheels.
Tyre issue that unfortunately is common for HGVs working off-road and on unfinished surfaces. Company director, Rachelle Mason spoke about what the company expect from WASTE’18.
She said: “Our Company has a nationwide client base so doing a show outside the northwest can only help us build further.”
Phone: 0800 772 0014
Chambers of Commerce are modern, dynamic, and vibrant champions of business communities all across the UK. Together they are the voice of Britain’s civic businesses, helping companies, places, and people to achieve their full potential.
The Coventry & Warwickshire Chamber of Commerce (C&WCC), which has been championing businesses since 1903, will be exhibiting on indoor stand 5 at WASTE’18 at the Warwickshire Event Centre on July 5.
Chris Nagle, C&WCC Events & Marketing Manager what the focus will be at this summer’s number-one waste and recycling event, in Leamington Spa.
Chris said: “We recognise business has a huge impact on the environment and businesses have a responsibility to manage their waste and recycling in a responsible manner.
“We are looking forward to engaging with businesses in the waste recycling sector and understand how the Chamber can support businesses in this sector.”
Warwickshire was recently reported to be ‘the place to do business’ with the county seeing the fastest growing economy in the UK. The Chamber represents businesses in this dynamic, and Chris spoke about the organisation’s excitement to be involved in a pro-active location within Warwickshire.
Chris added: “Over 40 million people live within two-hour drive of Warwickshire and so choosing a central location highlights the connectivity of our region, the ease of access and showcases the array of benefits to bringing large scale events to this area.”
Regarding what the organisation will bring to WASTE’18, Chris explained the Chamber of Commerce offers a wide range of benefits and services to enable businesses to survive, thrive and grow.
From sole traders to multi-nationals, the Chamber champions a positive UK business environment. We also have expertise in International Trade for those looking to export their products and services.
Phone: 02476 654321
COVENTRY CITY COUNCIL’S Waste Solutions business is exhibiting for the first time this year.
They already offer a range of waste solutions such as skip hire, ROROs, FELs and wheelie bin collections to the public, commercial, and industrial sectors across Coventry, and are fast
expanding into the Birmingham region.
They offer a reliable, value-for-money service that is price competitive and flexible. They are able to offer businesses recycling incentives to help reduce their waste disposal costs.
Phone: 02476 833945
Desert Engineering will be exhibiting on WASTE ’18 indoor stand 28 at the Warwickshire Event Centre on July 5 and will be showcasing the company’s range of products.
Richard concluded: “Although the footfall of WASTE ’18 won’t be as high as let’s say RWM, the show will provide the opportunity to speak to companies from an industry relevant to us in a cost-effective way.
“The one-day exhibition is ‘down the road’ from us – it’s easy to manage, inexpensive – it’s worth doing for Desert Engineering.
“Any companies further down than the West Midlands may not travel up past the West Midlands for an exhibition, so with Skip Hire & Waste Magazine moving their exhibition to Leamington Spa, I’m confident it’ll increase the chance of reaching companies in and around London.”
Phone: 01788 211120
Doyle Machinery Limited are the sole UK partner and distributor for German manufacturer Arjes Gmbh Recycling Innovation Equipment – delivering the leading supply, recycling and materials processing equipment for the UK and Ireland.
Doyle provide a range of specialised equipment to deal with shredding, crushing and screening solutions for processing waste wood, green waste, biomass, plastics, paper, domestic and industrial waste, scrap metal, used tyres and other materials.
Doyle Machinery’s years of specialist service means the company is nationwide leader for equipment and integration of stationary shredding solutions, which can be modified and designed to fit a company’s existing facilities.
Phone: 03330 433322
Waste to Energy industry leaders Ecotec Services Ltd will be exhibiting at WASTE’18 on stand E on July 5.
The waste-to-energy specialists will utilise this summer’s number-one waste and recycling event to display their expertise in the design, supply, install and maintenance of RDF incineration Plants.
Ecotec is based in Worcester, but have unrivalled experience in the installation and maintenance of Advanced Thermal Treatment plants, from Permitting to creating pioneering, innovative, efficient and cost-effective solutions. This passion for the energy sector ensures they remain at the forefront of renewable energy technologies, while providing outstanding levels of customer service.
Phone: 01905 761690
One of the UK & Ireland’s leading waste wood recycling companies, EGGER Timberpak Ltd, will be exhibiting at Waste ‘18 on indoor stand 17 in Warwickshire this year.
Gavin Ball, Timberpak Customer Relationship Manager, said: “Over 15 years we have provided continuity and reliability for our customers and this has seen us develop many strong long-term relationships with major companies, including Viridor, Biffa, Renewi and, Herman Miller.
“We see our attendance at Waste ’18 as an ideal platform to catch up with our existing partners and showcase our services to a wide range of potential customers – whether they are a large furniture groups, local authorities, construction companies, industrial users, or waste management companies.”
The company’s approach to customer service has seen it go from strength to strength, which is underpinned by continuous investment across its four UK sites (North East, Yorkshire, South East, and Scotland).
Most recently Timberpak Scotland has benefited from additions to its fleet size, the purchase of a new Haas Tyron 2500 slow speed shredder and installation of a new picking station.
EGGER Timberpak Director Mark Hayton, said: “With a focus on delivering a quality service and product, our latest investments bring the benefits of smoother delivery drop-offs, quicker and more efficient processes, an improved recycled wood product for our parent company EGGER (UK) Limited and an increased acceptance of wood.
“All of which bring benefits to our customers and will help to futureproof the business.”
Phone: 0113 248 3777
Email: firstname.lastname@example.org (advertising)
Welcome to Elite Digital Systems, a privately owned company based in Warrington and Manchester.
The company Specialise in the design and installation of CCTV and PC based Access Control System, in order to protect customer’s premises and staff.
Elite Digital Systems provide a no-nonsense policy with top quality advice, workmanship and service back-up.
The business is now in its 26th year and, in this rapidly changing industry, has gained a vast knowledge of the surveillance equipment.
Through experience and skills, the company are able to design the most cost-effective system – designed to suit individual application and requirement.
Digital recording systems with transmission can enable customers to monitor their organisation live from any location in the UK, Europe or even around the world. This can be achieved via iPhone/Android, Tablet etc.
Our breadth of experience, quality products and highly specialised skills set us apart from our ever increasing competition, and with service backup that is second to none, we truly are the ‘Elite’ in our field.
Access Control is the concept of electronic access providing the most efficient and convenient way of securing your building and assets. Although locks and keys allow someone to secure a building, when keys are lost or stolen, the inconvenience and expense of changing locks and re-issuing keys – especially on a large scale – can be considerable.
Keys may also be copied, creating even more security risks. Access Control enables users to completely control who has access to a building.
All businesses, whether small, medium or large, have assets that need to be protected from theft. There is also the issue of protecting staff and their property. It is common in buildings secured by locks and keys for doors to be left unlocked all day. This opens up the possibility of opportunist theft and malicious damage.
Installing an access control system means customers will never have to change a lock again. Tokens are issued to allow access through the controlled doors, and are easily barred from the system if they are lost, stolen or just not returned by someone who leaves the company. Barred tokens will not allow access through the controlled doors.
Elite Digital Systems provide a one-stop solution, including financial benefits to gain from leasing capital equipment, such as:
Once an access control system is installed, all doors controlled by the system will automatically lock when the door is closed. Anyone without a PIN or access token is unable to enter. If necessary, doors may be set to unlock during a designated time frame.
Access control can also offer flexible control over users’ access rights. For example, all staff can gain access through the main door of a building, but access to internal areas may be restricted to those who have a specific need to be there. Access may also be restricted by time, only granting access to particular users at certain times of day or night.
Access control offers a secure, convenient, flexible and cost effective way of controlling who has access to your building and when that access is allowed. Access control gives organisations the security they need.
Choosing an access control system is an important financial decision for most companies. The cost is of course important, but the system also needs to match your requirements and be completely reliable.
Elite/Paxton Access specialise in access control solutions. Our team are focused on designing systems that are fit for their purpose, containing the important features that are necessary for well-run organisations. Our commitment has resulted in our products winning a reputation for reliability and ease of use.
Implementing an access control system can feel like a big change in company practice. The access control should give the benefit of additional security without requiring time-consuming administration. Elite/Paxton Access systems are intuitive and straightforward to administer. The increased security is a benefit to all, rather than a benefit for some and a headache for those who have to administer it.
Phone: 01616 679449
Emerald Trading Waste Solutions Ltd will be exhibiting at the WASTE ’18 exhibition on Stand 58-59 as lanyard sponsors at the Warwickshire Event Centre, in Leamington Spa on July 5.
It will be the second year in a row, Emerald Trading have exhibited for the annual WASTE show, which is held by Skip Hire & Waste Magazine, but it will be a first for Emerald as lanyard sponsors.
The Staffordshire-based company offer bespoke waste management solutions and will be utilising WASTE ’18 to reach out to new clients and outlets, nationwide.
Emerald Trading Waste Solutions’ Operations Director, Alex Gilbert said: “We currently process generic materials such as cardboard, plastics, RDF, but we always cover other areas for material processing including equestrian surfaces, carpet recycling, and site clearances.
“For WASTE ’18, we’re rebranding a horse transport trailer and bringing it to the show. We’ve got a great pitch at the event on July 5, so becoming the show sponsors was a no-brainer – it’s exciting times.
“Also, the WASTE event moving to Leamington Spa means it’s a lot closer to us personally and it’s more UK central on a national scale – compared to last year’s event in Manchester.
“Our customer base is as far down as Essex and as up north as Scotland. So, with it being in the West Midlands, this is very beneficial for us and we’ve already invited a lot of our clients.”
With over 30 years’ experience pertained within the waste and recycling industry, Emerald Trading have access to many outlets to process a variety of materials, while providing a dedicated UK customer care team who will manage the whole process for customers.
The future looks bright for Emerald as the waste managing and trading specialists have branched their reach into Malaysia and Vietnam to grow their outlet base, as an alternative to China after the East Asian country decided to no longer accept all wastes from Europe.
Indoor area, Stand 58-59
Phone: 01785 719 991
The purpose at Environment Media Group (EMG) is to provide an outstanding service to companies in the waste and recycling sector, and beyond.
EMG provide many avenues for events, design and advertising in the waste and recycling sector, including the UK-leading news site in recycling and waste management, letsrecycle.com.
Other publications include Recycling and Wood Recycling magazine.
With an impressive history in publishing and events, EMG provides maximum exposure opportunities to companies in the sector looking to alleviate their brand and stand out from the crowd.
Phone: 02076 334500
Exhibiting on stand 14 is Gasmet Technologies (UK) Limited, a company that provide world-class testing and monitoring instrumentation for use in industrial processes, stacks, chimneys and ducts, as well as in the field and in the laboratory.
The company, has recently – and officially – changed its name from Quantitech after it was acquired by Gasmet Technologies Oy in 2015.
Its success is built upon the world-leading products and customised systems on offer, coupled with outstanding levels of service and technical support.
As a subsidiary of Gasmet Technologies Oy, Gasmet UK staff have an unrivalled understanding of FTIR multiparameter gas monitoring technology. They also have longstanding experience in providing monitoring solutions to meet customers specific needs.
In addition to FTIR, Gasmet’s product range also includes Tunable Diode Laser Absorption Spectroscopy (TDLAS) laser gas analysers, Cold Vapour Atomic Fluorescence (CVAF) continuous mercury monitors, Flame Ionisation Detectors (FIDs), heated sample lines and Portable Infrared Analysers.
The Hire Division offer the opportunity to ‘Try Before You Buy’. It also provides access to the latest technology without capital cost.
Gasmet UK is a founder member of the Source Testing Association (STA) and is an ISO 9001:2008 Approved Supplier.
Significant investment has been made in stock of original manufacturer parts to ensure the availability of spares.
The testing instrument company has recruited highly qualified Analytical Chemists to assist the Service Department with technical support and application related problems.
We have established efficient communication channels to provide access to the manufacturer’s Application Chemists and Engineering groups to ensure a timely response to application and technical queries.
Installation of ‘remote access software’ is recommended to facilitate interrogation of your analyser files by either Gasmet or the manufacturer’s engineer’s.
Our preventative maintenance service contracts can be tailored to ensure an efficient cost-effective service.
Gasmet offer technical support in the following areas:
Family-run business Gulliver’s Truck Hire Ltd was founded by Chairman Gabe Harding, who comes from a family of butchers, and had his own shop based Bedminster, Bristol.
In 1960, one of Gabe’s regulars mentioned they were off on holiday and would not require a meat order the next week. After asking how they would get there, the customer revealed he was renting a car and gave the quoted price.
At this point, Gabe thought to himself: “I could do that.” The rest, as they say, is history.
Today, with depots all over the UK, Gulliver’s Truck Hire recognise every customer and every industry faces different challenges.
The truck hire firm understand customer needs in industries like solid waste, liquid waste, recycling, construction, demolition, and green waste.
Gulliver’s fleet extends to over 4,000 late registration vehicles, ranging from small vans through to 44-tonne tractor units.
The truck hire firm’s partnership with the best suppliers in the industry allows Gulliver’s specialist team to provide a multitude of new products, deliver cutting-edge technology and most fuel-efficient options, and create the state-of-the-art safety systems with specialised comfort features.
Whether customers need a vehicle for a day or a long-term fleet of specialist vehicles, Gulliver’s have the flexibility and expertise to meet all requirements and expectations.
Gulliver’s Truck Hire’s packages maximise productivity and reduce vehicle downtime with customised vehicle configurations for client’s waste and refuse applications.
Marketing Manager, Catherine Taha added: “Gulliver’s and customers can work together to uncover hidden opportunities in order to boost fleet productivity.
“Since 1960 we have provided our customer’s with flexible rental packages and competitive rates, backed up with 24/7 after sales support.”
“Our team of experts are dedicated in keeping up to date with market trends and solutions ensuring we have the knowledge to provide you with the support you require.
“The team at Gulliver’s is very much looking forward to exhibiting our latest vehicle at this year’s WASTE ’18 show at the Warwickshire Event Centre in Leamington Spa.”
For all attendees, visitors and exhibitors, Gulliver’s will be delighted to answer any questions regarding requirements and needs.
Indoor area, Stand B
Phone: 0117 972 9281
HAMMEL (GB&I) Ltd, a 100% manufacturer-owned subsidiary is located in Thatcham and will be exhibiting at WASTE’18 on Outdoor Stand 11.
Equipped with a well-trained sales staff, HAMMEL is the official distributor of HAMMEL products in the United Kingdom and Ireland and provide factory-certified engineers with a high-inventory stocked warehouse.
Our products include highly customisable primary and secondary shredders, designed to take care of all recycling and shredding needs.
Operating a shredder saves or makes you money in areas such as volume reduction, metal recovery, or achieving a higher grade end product that can be tipped for less. Read about what makes HAMMEL shredders unique, and how HAMMEL outperforms all competitors when it comes to efficiency, throughput, and operating costs.
Phone: 01635 877 746
Visitors are invited to chat with Hiab’s people on its stands (Stand 37 and Stand C) at WASTE’18, and to take the opportunity to get up close to its MULTILIFT Futura 12 skiploader featuring the SkipTop 2.0 cover.
Drawing tremendous interest at both RWM and the CV Show – where a vehicle from the MULTILIFT Futura family took pride of place alongside the main visitor entrance – the MULTILIFT Futura 12 is a new-generation skiploader featuring a long list of design innovations that ensure the highest durability, professional appearance, top performance and safe, easy, fast operation.
Visitors to Hiab’s stand will get the opportunity to appreciate how the forward-looking MULTILIFT Futura combines good looks with being highly streetwise.
With just the touch of a button, SkipTop 2.0 makes it automatic, fast and safe to cover any load. With no need to climb up and wrestle with covers and ropes, SkipTop saves your time and your back – not to mention setting higher safety standards on the road.
In addition to displaying the MULTILIFT Futura 12, Hiab will be showcasing its expanding Service Dealer Network, which ensures it is never far from a customer. It will be drawing particular attention to its nearby Dudley depot – the largest in its UK network – which is due to be officially opened in July.
The company’s range of service offerings ensures Hiab is ideally placed to keep the wheels of its customers’ business turning.
Hiab is the world’s leading provider of on-road load-handling equipment, intelligent services and digitally connected solutions. Hiab’s offering encompasses class-leading load handling equipment including HIAB loader cranes, LOGLIFT and JONSERED forestry and recycling cranes, MOFFETT truck-mounted forklifts, MULTILIFT demountables, and tail lifts under ZEPRO, DEL, and WALTCO brands.
As the industry pioneer, its commitment is to increase efficiency in its customers’ businesses and to shape the future of intelligent load handling.
Hiab is part of Cargotec Corporation.
Phone: 01691 623100
Inciner8 International started in 2004 by Vince Ferguson after selling an incinerator to a poultry farmer in Norwich. It has grown since into company supplying waste management solutions to global clients, specialising in waste-to energy solutions.
The company will be exhibiting at WASTE’18 on stand 26 to present their expertise within combustion furnace (for cleaning soil) or drying of material ready for another process.
Inciner8 International Marketing Manager, Alex Billingsley spoke about the company’s focus at the one-day exhibition on July 5.
He said: “We are focussing predominantly on our new Waste-to-Energy technology, specifically designed and engineered to process up to 1000kg per hour of high grade RDF which in turn can output a steady 170 kWh.
“The output of burned waste can be utilised and turned into reusable energy, to create electricity or heat.
“Not only are you provided with a great solution to dispose of your waste, but you are also generating energy that you can use elsewhere, therefore saving costs. This is the future of incineration and combustion technologies!”
Regarding future ventures, Inciner8 are looking into building strong partnerships in the UK to deliver innovative waste-to-energy solutions and provide renewable energy to communities where needed.
Alex added: “Globally – we are working on some exciting projects to tackle some of the worlds’ biggest waste problems such as in the Maldives and the Lebanon.
“Asides from our commercial activity we’re involved in clean-up projects with Ocean Action groups – provision of clean potable water is also something we are strongly committed to on a global basis.”
Phone: 01704 884020
Ladybird Specialised Plant is the UK supplier of the innovative GAPO machine. We offer the machine for sale or hire.
The GAPO is a self-propelled, radio remote controlled unit that has applications across a range of industries. It is compact and powerful and has found users in the plant hire, waste and transport industries.
It is particularly well suited to the waste industry and there are a number of GAPOs working on waste and recycling sites moving hook lift bins.
The GAPO is a money saving alternative to relying on hook lift lorries. It is always available on site, it can be operated safely by a single individual without the need for a banksman, it is quiet and fuel efficient and it has low running and operating costs.
Outside area, Stand 10
Phone: 01527 889889
Lloyd Engineering was established by Matt Lloyd in 1998. Based in Herefordshire, the company initially specialised in the design and manufacture of agricultural equipment, predominantly apple and potato machinery for local farmers.
Lloyd Engineering will be exhibiting on outside stand 5 at WASTE’18 at the Warwickshire Event Centre on July 5.
The company’s engineering capability and facilities enabled us to meet the needs of other local businesses, and we undertook many projects in the water well drilling, geothermal, and forestry sectors.
In 2002, we built our first screening bucket. This came about from a building project at our own site, which required reclaimed material to be screened. From researching what was available on the market at the time, we decided to design and create our own screening system. This business has gone from strength to strength ever since.
We are constantly working to improve our products and facilities, always investing in state of the art machinery.
The screening bucket market has definitely come of age, and is now a recognised method of screening materials cost effectively.
The benefits of portability, low running costs, minimal investment, low maintenance; along with being able to work in confined and sensitive sites, certainly make a Lloyd screening bucket a good investment for any company.
Lloyd Engineering have designed a range of screening buckets that cover a wide range of applications and materials and we have the experience to recommend the best solution for you.
Phone: +44 (0)1544 260 531
Mach-Tech Services are the UK’s leading supplier of industrial shredding equipment and will be exhibiting on stand 3 at WASTE ’18.
The Manchester-based company’s versatile range of products consists of primary, secondary, universal and mobile shredders as well as processing systems for solid recovered fuels (SRF) and refuse derived fuel (RDF) and impact crushers for anaerobic digestion.
The company also offer a range of renovated equipment and recently invested in another Lindner Jupiter 3200 industrial shredding machine from Mid UK Recycling, to take the company’s Lindner total to over 20.
Ground-breaking and reliable technology are the standards set by generations of the Lindner family and the current range of multi award winning machinery has no equal in today’s marketplace.
Phone: 01706 838246
Exhibition stand 15
Magnetic Separations Ltd. have had a long-term partnership with Steinert GmbH for over 40 years, to provide innovative magnetic and sensor-based solutions for high volume material and recycling lines in the UK.
For more than 120 years, Steinert’s SEPARATION TECHNOLOGY has been providing automated separation solutions for the recycling and renewables markets in the UK. Due to the application of a dedicated range of sophisticated magnetic technologies and state-of-the-art sensors sorting equipment, our customers receive outputs in their purest forms efficiently, safely and cost effectively.
Today, STEINERT offers a wide range of separation & sorting solutions which are unique worldwide. By listening to our customers, we understand the commercial requirements and challenges faced, so we can contribute to economic success of our solutions.
We have regular dialogue with our customers, and are always willing to invest in our state-of-the-art sensors (flexiTech e.g. combination sorting systems – KSS) for unpredictable future markets.
Eccentric Eddy Current Separator (EECS):
The patented Steinert Eddy Current Separator NES, featuring an its eccentric pole system, is the ideal tool for the job – for more than 20 years! High yield and long service life are the benefits that ensure efficient and long-term operating results.
Aluminium recycling, shredder material, municipal waste, slag, foundry sand, glass, electronic scrap (WEEE), wood chips, batteries.
A non-ferrous metal separator consists of a short conveyor. A rapidly rotating system of permanent magnets is incorporated in the head drum. The magnets generate strong eddy currents in the non-ferrous metal parts which eject the NF parts from the rest of the material flow.
The special feature of Steinert’s non-ferrous metal separator is the eccentric pole system. The pole system is adjustable, so that the application of force can be optimally adjusted for maximum ejection efficiency. As compared to concentric pole systems, the eccentric pole system increases the metal yield by 50%. The service life of the belt and drum shell is considerably lengthened.
If you have a question relating to a product or specific application please find our contact details below. Your feedback is very important to us. We look forward to hearing from you!
+44 (0)208 642 4413
+44 (0)208 642 9476
Magnetic Separations Ltd.
14 Meadoside Road
SM2 7PF, UK
We have agents positioned across the globe, enabling Master Magnets to provide industrial magnetic solutions to worldwide markets, and our services are known to be some of the best in the world.
From our pre-sales services, which can include site evaluations and product sample testing, through to the commissioning services that can be carried out on our existing customers machines, Master Magnets will endeavour to provide helpful services throughout the entire sales process to ensure a high level of customer satisfaction.
The future looks bright for Master Magnets, as we continue to trade and grow world-wide. Our design and engineering departments now have the knowledge and expertise to solve any application presented to us from around the world.
We are now based at Redditch in Worcestershire, which is very close to strategic motorway links and served by nearby Birmingham International Airport. Since moving to the custom built site, the Redditch factory has provided Master Magnets Ltd with increased factory space, 30 tonne craneage, and easier transportation of our goods.
In 2003 when we moved to Redditch, we acquired IRS Ltd (Integrated Recycling Systems Ltd), providing the company with more strength in the recycling industry, to complement the existing product range.
In 2005 Master Magnets Ltd also acquired Metal Detection Ltd, well established in the electronic metal detector business for over 40 years. This latest acquisition gives the parent company Master Magnets Ltd an all-embracing position in the field of magnetic separation and extraction, all aspects of recycling, and full coverage of metal detection applications.
The future looks bright for Master Magnets, as we continue to trade world-wide. Our design and engineering departments have the knowledge and expertise to solve any application presented to us from anywhere around in the world.
In January 2017, Bunting Magnetics acquired Master Magnets.
Indoor area, Stand A
Phone: 01527 65858
For over four decades, MOBA Mobile Automation AG has been an established name in the mobile automation industry, and this summer will be exhibiting at WASTE’18 on stand 39.
The company specialise in the automation technology sector and will be speaking to visitors, exhibitors and other guests at the Warwickshire Event Centre on July 5 about how MOBA have remained a global leader in the development and production of machine control systems, identification, mobile weighing technology, and flexible software solutions.
Many decades of experience has allowed the MOBA Group to generate an in-depth knowledge through innovation. This innovative approach has attracted a well-known customer base including Caterpillar, Volvo, Dynapac, Bomag, Vögele, Ammann, Ruthmann, but to name a few.
More than 100 development experts and 500 employees worldwide work on a common goal every day: to sustainably change the mobile automation sector.
Phone: 03332 417677 (low cost); 01226 444250
The Plasterboard Recycling Facility
Since 1986, we have recycled close to 5 million metric tonnes of wet and dry gypsum wallboard material. We enable recovery of gypsum from building construction and renovations sites, as well as production scrap from drywall manufacturers. Around the world, we are acknowledged as the experts in efficient and economic processing of gypsum waste material because of our patented processes, proprietary technology and world-class teams.
Strong Partners. Strong Results.
NWGR has been recycling wallboard waste for almost 30 years – we have a tried and tested model that profitably works for our company and our wallboard manufacturing partners. To date, we have recycled 5M metric tonnes of gypsum material, globally.
Recycling and re-using gypsum material will reduce the need for virgin raw material. Use of recycled material has the potential for lowering costs in producing new drywall products. The business model for drywall manufacturers using recycled gypsum is compelling – you save by paying a low fee for disposal of manufacturing scrap and you can lengthen the useful life of gypsum mine resources.
NWGR has the highest quality recycled product in the industry. Our model which relies on patented processes and advanced equipment married with experienced teams at each of our facilities, leads the way in world-class technical and safety standards.
Wallboard manufacturers are assured their feedstock is of a consistent blend. With virtually no capital investment, you can help to conserve natural resources while responsibly endorsing sustainable processes and products.
We want to work with you to enable our successful business model in your region. We together can share the benefits of recycling gypsum wallboard waste if you:
Have the ability and desire to use recycled gypsum within your production lines.
Have at least 10,000 metric tonnes of production scrap, annually.
Are in a region where post-consumer waste can be collected.
There are significant benefits available to your production facility if you partner with the New West Gypsum Recycling team. You can have:
Lower cost feedstock
Minimised cost for production scrap removal
Better quality and more consistent gypsum product
The benefit of our 30 years’ experience and our patented processes
Closer and stronger relationships with your customers
With virtually no capital investment on your part, we can work with you to optimize gypsum reutilisation in your region.
When material goes to a landfill that should be destined for a recycling stream it represents an enormous loss of resources and economic opportunity. It is not just the material or energy value of the waste that is lost, but also the business opportunities associated with recycling and with integrating the recovered resources into new products and packaging that can be sold again.
January 2018 – We Have Moved! New Address Below!
Hutton Park, Hutton Moore Lane
7:00am – 4:00pm
Office hours: 9:00 am – 5:00 pm
Gate Fees: £60.00/tonne + VAT
Rates and fees subject to change without notice
All visitors to have full PPE
The Directions to the new site/location are as follows:
Come off M5 weston junction 21 go towards Weston Super Mare,
Across the roundabout (second exit),
Carry on down the dual carriageway towards the Helicopter museum, take the first exit at roundabout sign posted helicopter museum.
At the next roundabout that you will see the helicopter museum and travelodge come completely around the roundabout back on yourself (towards the dual carriageway).
Then it’s your first left after the roundabout, follow the road around past some bollards and large stones,
At the end of the road take a left hand turn through some metal gates and our site is half a mile down the old runway.
Once you arrive at the site report to reception for tipping instructions
The UK’s leading tech-driven business mobility provider, Nexus Vehicle Rental Ltd will be exhibiting on stand 11. With nearly two decades of experience, Nexus are arguably one of the pioneers for the development of innovation, while specialising in the efficiency and effectiveness of business mobility technology.
Nexus is the first and only provider to offer a UK wide HGV rental solution alongside cars, vans and specialist vehicles.
The company’s revolutionary online rental booking and management system IRIS is central to the company’s success.
Constantly being developed by the Nexus in-house specialist IT team, the IRIS system allows businesses to access over 550,000 vehicles, including 100,000 specialist commercial vehicles and 50,000 GHVs, across more than 2,000 UK locations.
IRIS enables you to keep on top of compliance paperwork with set reminders, easy invoicing and calendar showing vehicles on hire and an easy to use dedicated HGV dashboard to manage your rental fleet all in one place.
Through its unrivalled supply chain which Nexus has built up to be the largest in the country, the company can source any vehicle, anytime, anywhere, and can deliver within two hours of a booking being made. This expertise and excellent service has resulted with Nexus retaining 98% of the company’s year-on-year customers.
Whether it’s industrial cleaning, tarmac transportation, waste management of transferring hazardous goods, our municipal vehicle range can assist with business needs. If you operate in the utilities, government local authorities or building sectors, we can supply you with refuse vehicle, sweepers, gritters and cage tippers amongst many others.
Phone: 0845 867 9699
Perry of Oakley Ltd, UK leader in manufacturing material drying and handling equipment, will be exhibiting at WASTE ’18 on indoor stand D.
The Hampshire-based company was founded in 1947 by Tom Perry, a farmer’s son, who offered a mobile repair and manufacturing service to local farmers and businesses in the Basingstoke area.
The business steadily developed on its reputation of delivering reliable, well-engineered conveyors and bucket elevators during the early 1950s.
In 1990 the business had expanded sufficiently under the direction of Tom’s son Nigel Perry, which led to the requirement of a larger premises and a relocation move to Honiton in Devon was made.
During the last 16 years, investment in staff, buildings and automated systems has enabled Perry’s to apply its original, high quality manufacturing standards to an ever-increasing demand for its products.
The manufacturing company offer a complete range of mechanical handling solutions to customers, including grain and bulk material-handling and drying equipment since 1947.
Perry of Oakley have over 70 years’ experience in the manufacture and design of materials handling equipment.
The product range includes screw conveyors and augers, belt conveyors, belt and bucket elevators, intake systems to receive wood chips from trucks, woodchip and wood pellet stores, and discharge systems for biomass to feed boilers.
Biomass systems have tended to utilise woodchip which has required specialist delivery vehicles with noisy delivery systems and a slow delivery speed. By utilising our 70 years of material handling experience, the company have designed a complete range of ‘from-truck-to-store’ material handling solutions, resulting in quicker, cheaper and quieter deliveries.
This is accomplished by removing the need for specialist vehicles, or even shovelling the material by hand, as our range will effortlessly move customers’ material from the delivery point into stores at the flick of a switch. Using Perry of Oakley’s combination of products a solution can be found to customer’s biomass handling challenge.
The company’s range of products are designed and manufactured in the UK, are pre-galvanised, and can be designed and built to bespoke requirements or provided as modular sections to be built on site.
Delivering a complete engineering solution, Perry of Oakley provide bespoke design through to fabrication and installation. The company’s solutions are built to handle a range of materials including chopped straw, wood chip, wood shavings, sawdust, waste wood, wood pellets, and chopped Miscanthus, and are the perfect addition to your existing or planned biomass installation.
British proud and operating from our base in the West Country, Perry of Oakley have a strong UK customer base and export around the world.
Dunkeswell Airfield, Dunkeswell, Honiton, Devon, EX14 4LF
Sales: +44 (0)1404 890 300
Technical Support: +44 (0)1404 890 305
General Enquiries: +44 (0)1404 891 400
Fax: +44 (0)1404 891 402
Registered Number: 545324 VAT Number: 155 6952 78
RANGEWELL are unique in having comprehensively and independently mapped over 300 business finance lenders and 23,000 business finance products in the UK.
Working with professional advisors, IFA’s, accountants and directly with businesses to provide all types of business finance.
They will be available to provide advice and support on Stand 45. Rangewell work with you, in the way you want, to support clients or customers.
Their representatives actually like to talk to customers and partners – they’re not faceless and don’t sit behind computers all day – they like to chat.
Need access to new or used equipment? Rangewell are specialists in offering innovative finance solutions, so if you’re looking to optimise your business performance it would be well worth popping by their stand.
They will advise on every type of finance for every type of business, transparently and as painlessly as possible.
Phone: 02036 959476
Red Rhino Crushers are exhibiting on indoor stand 27 at the WEC on July 5.
We manufacture a range of crushers where performance and reliability comes as standard Winfield Engineering purchased Red Rhino in 2009 and Red Rhino (UK) Ltd was born.
All our products are manufactured in the UK
We supply our crushers all over the world and our crushers are manufactured here in the UK using the best quality materials and skilled labour.
We believe that by controlling the quality of the inputs into the product, the quality of the product we produce will stand up to the day to day rigours of the crushing industry.
Phone: 01476 590790
Roupcycle currently cover a great range of towns and areas in and around South West London, Surrey, Hampshire & Berkshire.
The Southern England company will be exhibiting at WASTE ’18 on stand 35 to reveal the company’s wide range of services, which include affordability, professional and environmentally friendly clearance solutions for homes and businesses.
The recycling firm also have partnerships nationwide allowing us to meet your needs wherever you may be located. Areas covered include: Aldershot, Bagshot, Basingstoke, Bracknell, Camberley, Chertsey, Cobham, Farnborough, Farnham, Fleet, Guildford, Kingston, Lighwater, Maidenhead, Reading, Ascot, Slough, Staines-Upon-Thames, Sunningdale, Weybridge, Windsor, Winnersh, Woking, Wokingham.
Phone: 01252 917070
Rural Energy are a company at the forefront of boiler and CHP system design and will be exhibiting at WASTE ’18 on stand 18.
The company’s products deliver a highly capable network of biomass installations on a national scale.
The company’s installers provide domestic, commercial and industrial biomass fitting throughout the UK and have done so for a decade.
Rural Energy’s Training and Skills Centre provides specialised biomass installations and services from dedicated maintenance engineers, who are there to support the company’s customers before and during and after the biomass fitting.
Phone: 0203 189 0654
Safetykleen, a Brentford-based market leader in waste collection, will be exhibiting on stand 9 at WASTE’18 at the Warwickshire Event Centre.
No collection is too large or too small, even just one drum, at a time to suit customers. Safetykleen manages total clear-outs, surveys and other industrial collection services to specific requirements, as well as providing helpful and informed advice.
The nationwide network of waste transfer stations means we can respond quickly and ensures regular pick-ups.
There is no need to call a variety of suppliers for all your different waste streams. We collect all your hazardous and non-hazardous waste within one simple administer service.
Our collect service includes, but is not limited to: aerosols, acid, anti-freeze, asbestos, batteries, brake parts clutch parts, corrosives, diesel, empty drums, flammable liquids, flammable solids, fluorescent light tubes, fuels, gases, grease guns, ink, oils, paint, paint tins, plastic containers, rags, solvents and toxic substances.
• We offer fixed-price plans to save you money and help with budgeting.
• If you choose our special Wasteplan service, we agree an annual collection schedule, at a price which includes all environmental charges, transportation and compliance management.
We take any waste produced to the highest possible level required by the Waste Framework Directive and prepare all paperwork and compliance requirements on your behalf. As an ISO accredited company our services not only help our clients obtain ISO 14001 accreditation but we also provide peace of mind.
Additionally Safetykleen supply, install and maintain special machines that clean industrial parts, whether engine parts to remove oil and grease or cleaning finished goods prior to surface treatment. Safetykleen are in fact the world leader, with about 100,000 machines in use around the world today.
Inclusive with the service is supply of cleaning chemistry whether solvent or water-based and Safetykleen will remove and replace this on a service cycle to suit your needs, plus Safetykleen will handle all the environmental paperwork for you.
Phone: 0203 814 8700
French-based Seligo Pro Ltd, by 3W Associates, will be travelling across the English Channel to exhibit at WASTE ’18 in Leamington Spa on July 5.
It will be the first time representatives from Seligo will be exhibiting at the annual WASTE exhibition, with a view to showcase the capabilities of the digital transaction and services platform – designed for waste professionals.
The platform is utilised by identifying sites with the necessary treatment capacities for companies with waste to dispose of.
Seligo optimises the sale of marginal capacities for treatment centres, and allows users to manage compliance and transaction payment in a secure environment.
SELIGO.pro is an online waste dedicated marketplace through which all types of registered and licensed waste collection, waste transportation, waste treatment companies can advertise their products or treatment capacity, and through which they can make reservations.
– Geolocalising the current and predicted treatment capacity available;
– Facilitating the sale of treatment capacity and the supply of waste, under the best market conditions;
– Optimising the use of treatment infrastructure and compliance management;
SELIGO.pro is operated by SELIGO Pro Ltd, registered as waste Broker Dealer under RegNo CBDU142880
1) SELIGO locates marginal treatment capacities and waste supply. Operators choose the best option according to their own criteria: product, quantity, price etc.
2) THE waste holders book treatment or services online. The treatment capacity holders book waste tonnage. Their profile has been validated in advance so that the transaction can be completed.
3) WASTE is taken to the treatment centre and checked, before being invoiced at the agreed price. Payment is made for each delivery.
Seligo Pro Ltd Director, Thomas Paris said: “The platform was presented at RWM in September 2017 and did attract some attention. We have since then released an Android app and are officially launching in the UK.
“We are looking at all sectors of the waste industry with a particular focus on construction and demolition waste and are actively looking at partner treatment sites that can advertise spare treatment capacity.
Thomas spoke about what attracted his company to exhibit at WASTE ’18. He said: “Our first clients and partner sites are situated in Birmingham, Leicester and London, as such the Warwickshire Event Centre’s location is ideal.
“3WAssociates (the mother company) may be French but SELIGO Pro Ltd is a UK based company. The location happens to be within reach of our first clients but more importantly we feel the event itself allows us to approach a different type of public than RWM.
“For our Seliog.pro platform, we are not focused on large corporate groups but are more focused on waste collection and treatment SMEs as they constitute the bulk of our initial client base.”
Statistically, landfill use has declined in recent years, but there are still obstacles preventing the best approach to waste treatment and recycling. For example, in Europe – with all the continent’s modern capabilities – only 41% of waste was optimised in 2015.
Seligo aims to improve the proportion of waste that is being optimised by creating the link between supply and demand.
Indoor area, Stand 19
Phone: +33 6 09 88 49 47
Since 1988, SETCO Solid Tire has manufactured tyres and rubber cutting edges on a 100-acre facility positioned in Idabel, Oklahoma, U.S.A. and as of 2016, SETCO owns and operates a warehouse in the UK, providing the manufacturing firm with a great hold on the European market.
Manufacturing from the ground up, SETCO’s range of solid tyres are designed for all makes and models of equipment, which are used in off-road applications and harsh environments.
SETCO’s industry-leading tyres come in a range for vehicles such as forklifts, crane, haul trucks, front-end loaders, while also providing solid tyres for backhoes. SETCO also provide specialised applications for skid steer tyres and manufacture rubber cutting edges.
The WEC will play host to SETCO, who can be found on stand 34. The firm are a wholly-owned subsidiary of SETCO Inc and is the exclusive distributor of SETCO products in Europe.
Phone: 07708 027 494
Silent Sentinel are an established UK company with over 25 years’ experience, specialising in long-range video and thermal imaging cameras.
The fire suppression specialists, which are based in Hertfordshire, are set to make their WASTE debut at the WEC on July 5 and can be found on the indoor Stand 12.
Although WASTE ’18 will be the first time the Silent Sentinel team are joining forces with Skip Hire & Waste Magazine, the fire prevention industry leaders are no strangers to events after exhibiting at RWM 2017.
How can Silent Sentinel help you?
It was only recently, thermal imaging became more affordable increasing the availability of radiometric thermal imaging technology.
While investigating several key industries, Silent Sentinel realised the waste and recycling industries were struggling with rising insurance premiums and increased fire risks due to increased processing of materials on a daily basis.
It has become more apparent insurance premiums across the industry are rising at an unprecedented level to the point where insurance is being refused; even for those with no claims since they have been in business.
In the waste and recycling environment, the internal temperature of many types of material can increase to the extent they begin to burn spontaneously. Fires can result, and intense heat can cause nearby material to ignite, which can result in extreme damage.
Although conventional fire alarms and firefighting systems are often installed, they generally only operate after a fire has started.
Thermal imaging can help to detect hot spots before a fire starts so proactive and preventive measures can be taken before there is a major incident.
Without going into too much of the ‘nitty gritty’, Silent Sentinel’s thermal radiometric cameras will allow the measurement of heat sources in video cameras up to 400m in one direction – meaning they can cover 360° and can target specific areas of interest.
Such is the accurate nature of this technology and more so the temperature measurement, allowing reliable detections of fire and heat in large open spaces.
Silent Sentinel’s innovative solution can be applied to the waste management and utilities industry where fire is one of the larger risks to recycling and waste sites.
The Silent Sentinel radiometric camera’s flame, hotspot, and fire detection analytics enable fast and effective response to safety risks – allowing the user to monitor specific risk locations or vast areas for early heat, flame and fire detection. The cameras can be integrated with multiple alert, alarm and transmission systems.
Silent Sentinel fire detection and prevention camera solutions reduce the risks of harm to people and costly asset damage. They also reduce the cost and disruption of false fire alarms by providing the ability to scrutinise hotspots at the earliest opportunity. This investment will reduce the insurance premiums and ensure your assets are more safe and secure.
Indoor area, Stand 12
Phone: 01920 871734
Exhibition stand 32
As independent brokers, we are not tied to any one lender – so neither is your business. This means that we are in the best possible position to create the right solution for the unique needs of your business. TVAF is regulated by the Office of Fair Trading, so with your assets in our hands, you can enjoy real peace of mind.
With over 25 years’ experience in Asset and Equipment refinance and finance solutions for business, as well as the knowledge, enthusiasm and passion to deliver your business a competitive and appropriate Asset or Equipment Finance solution.
From initial enquiry, right through to the delivery, Thames Valley Asset Finance makes Asset Based Finance both easy to understand and straightforward to arrange. As an independent Asset and Equipment Finance company, we have unlimited access to an extensive and unrivalled panel of leading UK lenders to secure you the best possible terms, whatever your business area.
Whether you are a Sole Trader, Partnership, Limited Liability Partnership, Limited Company or a PLC, we can typically get you an approval, quickly and with the minimum of fuss. By offering the guidance you need to make your vehicle and equipment purchases with confidence, we will ensure that you truly feel supported, every step of the way.
We can supply your business asset finance for almost any type of asset you need to acquire, including (but is not limited to):
Fork lift trucks
Engineering machine tools
With TVAF, your Asset and/or Equipment refinance and financing could not be simpler or safer.
Thames Valley Asset Finance Limited
7 West Mills Yard
Telephone: 0333 1212 400
Telephone: 01635 785400
Fascimile: 0844 561 7427
The Crosby Group, which is based in the West Midlands, manufacture a line of premium accessories for chain and wire rope applications and will be exhibiting on indoor stand 33 at WASTE ’18.
Crosby are a world leader in the heavy lift industry and strive to set the standard for quality, training, and technical expertise in the field.
Those who know the name ‘Crosby’ know the significance the name holds within the rigging and lifting industry. It is a name trusted for over 130 years; is rooted in tradition; and drives the industry-changing innovations for a better tomorrow.
As the world’s leading manufacturer for rigging, lifting, and material handling applications, Crosby delivers a diverse portfolio of products engineered to exceed the toughest demands of any industry, including land-based and offshore energy, construction and infrastructure, cargo handling and towing, marine, mining, and transportation.
Area Sales Manager at Crosby Group UK, Ashley Hall said: “Crosby Europe are excited to exhibit their Kuplex Skip Fittings in conjunction with Arbil Ltd.
“Kuplex skip fittings have been in the market since 1982 and are the key component in the skip industry.
“Designed, forged and tested in the UK, we pride ourselves on making the absolute best products we can, to give the end user absolute confidence with high quality grade eight chains manufactured in Europe.
“Arbil Ltd, as partner of choice, are best placed to take our skip fittings and chain to make fully bespoke skip chains to customer specification.
“Come and visit us on stand 33 to discuss your requirements.”
The company’s products range provide uncompromising quality and includes hooks, Red Pin® shackles, hoist rings, master links, lifting clamps, slings, turnbuckles, snatch blocks, crane blocks, sheaves, and a host of other custom-engineered solutions – the most comprehensive portfolio in the industry.
Choosing Crosby means guaranteed superior products. Customers are guaranteed the quality assurance that comes with comprehensive risk management, world-class training programs, and a customer service team committed to exceeding end user, market, industry, and worldwide expectations.
At Crosby, it is not just about products that lift – it is about working with a trusted partner that is invested in customer success, while creating confidence and without compromise in a superbly-engineered world.
Crosby also counts as the reference in the market for permanent focus on quality, safety, product development and its wide range of products: wire rope-end fittings, shackles, CrosbyIP plate and beam clamps, McKissick® blocks and sheaves, chain and accessories, Crosby Kuplex skip fittings, and load binders.
Manufacturing in accordance with ISO 9001 procedures, Crosby’s products are in compliance with international standards like DnV 2.7-1, GOST-approval, ABS, EN-standards and other international standards.
Phone: 01226 290516
Tyre Boss is a premier tyre trader; sourcing and supplying cushion solid and specialist tyres for the waste recycling and scrap metals industry. We are the first point of contact for tyre dealers and end users, sourcing standard and specialised tyres for machines and capable of undertaking conversions.
As well as supplying budget and premium OTR tyres and cushion solids, Tyre Boss Ltd is the proud, exclusive UK agent for TY Cushion Solid Tyres.
The company can supply tyres for the complete range of construction vehicles from wheeled excavators to telehandlers.
Tyre boss has a great network of contacts in the UK and Europe and can source tyres to desired specification and deliver efficiently to customers via its distribution arrangement with a large logistics company.
Tyre Boss is proud to announce that they are the exclusive agent for TY in the UK and will be promoting the full range of TY Cushion Solid tyres for loading shovels, re-handling machines, telehandlers and other handling machines at the Waste ‘18 show this July on Stand 31.
Even though Tyre Boss are new to the WASTE ’18 show they are no stranger to the requirements and demands of waste and recycling industry, with their Cushion Solid tyre range.
The TY cushion range has been made specifically for the waste and metals recycling industry with super deep tread giving four times the life of a pneumatic tyres providing you with a reliable maintenance free solution and great tyre longevity.
This means great value for money, making them an exceptional solution in the waste recycling industry. Our tyres are leachate resistant, oil resistant, cut resistant and puncture resistant as standard and have a 40+ year track record.
We also offer time saving solutions such as our 10.00-20 solid tyre for re-handling machines (e.g. Fuchs, Liebherr or Sennebogen) which come as complete tyre and wheel assemblies ready to bolt onto your machine. We also offer service exchange for loading shovels and telehandlers minimising the downtime of the machine during tyre changeover.
We have ranges to suit all budgets and we are competitively priced in the market and we can also provide a full range of pneumatic tyres and tracks for all plant and OTR machines.
We are happy to discuss any needs you may have and help you with your tyre requirements.
Visit us on stand 31 at the Waste 2018 on the 5th July Warwickshire Exhibition Centre.
Phone: 07484 303123
Exhibition stand 13.
Expertise you can trust
We’re a group of contaminated land specialists with a wide range of experience in brownfield development. We’ve built a reputation for providing highly efficient, cost effective, and environmentally sound contaminated land remediation services. And have used our extensive knowledge, our highly. skilled staff, and our depth of expertise to successfully tackle an extensive range of projects.
When you’re looking for safe and trusted soil remediation, either on-site, or off-site at our Fixed Soil Treatment Facility, you can be sure we’ll complete your project on time, on budget and adhering to the strictest health and safety standards. From main contractors to environmental consultancies, and from groundworkers to property developers to local authorities, we’re here to solve any contaminated land problems you face.
We have strong relationships with other treatment centres, disposal facilities, landfills, incinerators, recycling facilities and laboratories across the UK. This means we’re able to provide you the best options, and the most competitive rates, countrywide.
We arrange disposal and recycling of:
• asbestos contaminated material
• invasive plants, such as Japanese knotweed and Himalayan balsam
• quarry waste
• mining, industrial and process waste
The highest standards of health and safety are always at the forefront of our minds. They play a vital part in what we do, and permeate every aspect of our remediation work. We take great pride in our safe working practices, and are committed to having only the most experienced and highly trained site staff. All our site managers hold the Site Managers Safety Training Scheme (SMSTS) certificate, Asbestos Awareness Training and First Aid Qualification.
UK Remediation Head Office:
Bells Business Centre,
196-198 Cheltenham Road,
Bristol, BS6 5QZ
Tel: 0117 9244990
Fax: 0117 9241558
With over 50 years of experience in the tech sector of biomass energy, Uniconfort will be taking the company’s expertise to the WEC for WASTE ’18 on July 5.
Through producing commercial and industrial biomass boilers for many decades, Uniconfort’s global range of boilers are ideally suited to low quality, high moisture content fuels such as recycled wood, demolition waste or wood offcuts from furniture manufacturers or sawmills.
The Global boilers can also handle a high degree of contamination from glues, paints and plastics.
To burn contaminated biomass fuels legally for WID and IED within the SWIP guidelines, and to comply with all emission regulations there are a number of design features that are needed. For example, the correct combustion chamber temperature must be maintained at either 850° or 1,100° depending on the contamination level. A two-second retention time of the flue gases needs to be seen in the secondary combustion chamber and certain additives may also need to be added to reduce Nitrogen and Sulphur, just like the AdBlue that is added to trucks.
To ensure complete combustion at start up and shut down we employ a secondary gas or oil burner to raise the combustion temperature to the correct level before we feed any fuel into the combustion chamber.
This ensures that the fuel is completely combusted and all contaminates are processed. Likewise, on shut down we use the secondary combustion process to maintain the combustion chamber at the correct level until all of the fuel is expended from the chamber. This ensures complete combustion from start to stop.
The Global boilers emissions are controlled and monitored by our own sophisticated control panel and a Continuous Emission Monitoring Systems, or CEMS, which records combustion temperature, fuel feed rate, flue gas temperature and particulate matter, or dust, in the exhaust flue gases.
Uniconfort’s operations involve production and construction of biomass boilers for hot water, superheated water, steam, diathermic oil, and hot air/gas generators.
The energy for the company’s biomass production comes from forest-based wood processing, agricultural, food processing, special crops and urban green cleaning industries.
As well as custom-designed biomass boilers, Uniconfort specialises in products ranging from remote heat systems, cogeneration and heat-to-electricity production, and industrial processing.
Phone: 01400 225005
The VBG Group is an international industrial group with more than 1,400 employees in 18 countries.
The company’s UK subsidiary VBG Group Sales Ltd, which is based in Warrington, will be exhibiting at WASTE ’18 on Stand 56, situated indoors.
VBG Group Sale Ltd exhibited at WASTE ’15 and decided to exhibit again after Skip Hire & Waste Magazine chose to move its event to the heart of the country, in Warwickshire.
VBG is the leading drawbar coupling system supplier. The company also supplies a full range of vehicles under run systems, all of which are approved to the latest EC standards.
VBG UK & Sales Manager, Howard Ostle said: “For 2018, we have just taken on additional office and warehouse facilities at our Warrington site to cope with the additional demand from the UK market. These new additional facilities will be completed by March this year.
“We are also in the process of building a service training trailer to provide on-site workshop training for companies who are not able to send staff to our Warrington service training site.
“VBG Group are keen to invest in the UK and support the industry providing product support from cradle to grave. The waste industry is an important sector of our business and we are looking forward to supporting the WASTE ‘18 show this year.”
How can VBG Group Sales Ltd help you?
VBG is a world leader in the development of innovative, reliable trailer coupling system after years of strongly focusing efforts on innovation excellence. The Warrington-based company offer complete coupling systems – everything needed to connect trailers to trucks – ranging from single couplings to advanced cab controlled multi-function truck coupling solutions.
After building an in-depth understanding of the transport industry, the company can provide solutions for safety, responsibility and innovation.
The VBG 795 V-2 coupling system comes with a new quick change guide funnel system. If you need to change or replace the guide funnel, you can do it yourself in minutes. With three different guide funnels, there is an optimal funnel for your specific needs. It’s as smart and easy as that!
Starting in Vänersborg, Sweden, 65 years ago, the international firm’s divisions have vast experience in striving to generate competitive advantages through means of innovative product development and efficient production, distribution and marketing. In turn, the chain leads to products with high customer value.
Indoor area, Stand 56
Phone: 01925 234111
Howard Ostle, UK Sales & Marketing Manager: 07881 913478
VEKA Recycling is Europe’s largest PVC-U recycler. VEKA Recycling is committed to creating a cost-effective and sustainable alternative to landfill across the UK. With a primary processing facility in the UK, VEKA Recycling accepts all brands of windows.
At the VEKA recycling plants in the UK, France & Germany we can process old windows to such a purity we can make quality new windows. This makes UPVC one of the most sustainable recycled products currently available in the building and home Improvement market.
This ensures that VEKA Recycling offer a unique closed loop recycling initiative for customers with a green conscience.
VEKA Recycling successfully process thousands of tonnes of end of life windows in the UK each year saving companies thousands of pounds in landfill costs and offering a long term solution for recycling old windows and doors.
As well as our primary Production site in the UK we have several Recycling centres around the country collating materials ready to deliver to the UK plant.
It’s simply a waste not to.
Vertas Environmental is a very different kind of waste company. We are purely in the business of management and therefore in the unique position of being able to work with waste and recycling service providers throughout the UK.
This allows us to offer impartial advice on the most suitable and cost effective disposal and recycling methods for your particular location.
We recognise that each of our customers has different needs, and we pride ourselves in offering individual Total Waste Management Solutions. These are tailored to your particular requirements, rather than an Off-The-Shelf service that may not be exactly right for your business.
At Vertas Environmental, we take holistic approach to waste management, tackling the whole spectrum of waste streams, using the Waste Hierarchy concept.
This is achieved by working closely with you to gain a full understanding of your business. Our approach enables us to highlight areas for increased efficiency in your business processes and leads to cost savings as well as environmental improvements and sustainable practices.
We will also review all Environmental Legislation that affects your company, and advise on compliance. It is this attention to detail that sets us apart from our competitors.
We manage the total package of services in a single contract. This saves you time and money by allowing you to focus your resources on core activities. Our ‘One Stop Shop’ approach is proving highly popular with companies that want to solve the issues they face in the most professional and effective way.
Phone: 01455 442965
Vision Techniques Group specialise in vehicle reversing cameras and CCTV systems for commercial vehicles, and will be exhibiting at WASTE’18 on stand 6.
The manufacturing group supply a variation of vehicle safety products, which are designed to prevent false insurance claims, deter theft and vandalism, and allow drivers to mobilise safely through innovative vehicle safety cameras and security solutions.
Vision Techniques is one of the UK’s leading vehicle safety companies, offering a complete range of products to reduce the risk of collision and maximise the efficiency of a company’s fleet.
In such a rapidly-changing world, customers require vehicle cameras to help their fleet of vehicles such as vans, HGV’s, lorries, trucks, buses, and coaches. These products aid vehicles to manoeuvre safely through on-board digital video recorders by providing evidence and surveillance.
The a range of hi-tech products available include mobile vehicle CCTV camera systems, radar sensor systems, radar alarms, reversing camera systems, vehicle operator and crew communication systems, and fleet tracking systems.
Vision Techniques’ quality reversing aids and other money-saving products help prevent accident and motivate ‘best-driver practice’, while bringing peace of mind and the ultimate protection to company vehicles.
Phone: 08452 873 182
Web.com will be attending WASTE ’18 as an exhibitor at the WEC on July 5 2018. It will be the first time the Internet services’ company will be involved with Skip Hire & Waste Magazine’s annual exhibition.
The website specialist company, which provides a full range of services to small businesses, are confident the exhibition will provide the opportunity to introduce specific verticals into their marketing strategy such as the skip hire and waste management sector.
Emma Stainthorpe of Web.com, said: “We chose this sector because it matched a set of criteria.
“We have many success stories in the skip hire industry, who have seen a fantastic ROI with our services and we have really been able to make our products work for them, with one of our biggest hero clients is Bristol & Avon Transport.
We see the waste and recycling sector as a fantastic avenue to get into and really feel we can help these customers.”
Web.com have offices in Cardiff, Leeds, London and Stockton and many field reps travelling throughout the UK, however, no one in the Warwickshire area, but Emma sees WASTE ‘18 as a great opportunity to get the company’s foot in the door and meet businesses/people in this geographic area.
Speaking about WASTE ‘18’s strategic benefits, she added: “People will be willing to travel anywhere, however, centrally located exhibitions are easier for the majority!”
“Web.com will be offering customers a variety of marketing services to help them become more visible online including website design, pay-per-click advertising, SEO, and social media.
Emma concluded: “We will also be giving away lots of free marketing advice and tools to help customers implement an online strategy into their marketing.
“Our UK Managing Director recently wrote a 22-page local search marketing guide specifically for skip hire customers and this will be one of the giveaways.”
Web.com’s final plan is still yet to be decided but along with free promotional gifts the website specialist firm hope to give away special offers/discounts on services to WASTE ‘18 attendees.
Indoor area, Stand 1
Phone: 01642 356194
Weighbridge Services Ltd, based in Yorkshire, are a family run business operating for nearly 10 years with over 30 years experience in the weighing industry.
Dealing in Repair, service, calibration, conversions, sales and hire of weighbridges across the UK, the company’s expanding administration and engineering staff provide a friendly and professional service, while allowing the best prices possible for the rapidly changing weighbridge market.
Using UK materials, UK manufacturing and top of the line electronics we can cater for almost every requirement for any size business from farmers and scrap metal merchants to Bio plants and large scale distribution sites.
Phone: 0114 321 6364
Wood Energy will be exhibiting at WASTE ’18 on the indoor stand G to showcase the company’s specialist knowledge and services in biomass systems.
World-class biomass solutions from 9kW to 10MW
Wood Energy Ltd is widely acknowledged as a biomass specialist and has been a pioneer of biomass in the UK since the early stages of the industry. We offer a range of wood chip, wood pellet and log boiler systems, ranging in size from 9kW to 10MW, for commercial, industrial, public sector, agricultural and domestic buildings of all sizes and almost all temperature ranges including steam and thermal oil.
Dedicated to biomass
We have been dedicated to biomass for much longer than most of the providers in the market and we only provide biomass. As a result, our in-house experts are highly experienced specialists with a comprehensive understanding of the financials, the technology, the process and the Government’s Renewable Heat Incentive requirements.
Unrivalled technical expertise
We are an engineering-led organisation with significant experience of designing, installing, commissioning and maintaining large and complex biomass systems across practically every industry. This has equipped us with the ability to understand client requirements in detail and therefore ensure that you have the right technology, in the right place, and that every consideration is made in ensuring that your system is as efficient and as robust as possible.
Experienced Registered Installation Network across the UK
Our in-house installation team has delivered over 100,000kW of medium and large-sized projects across the UK. We also work with a network of carefully selected Registered Installation Partners who, as well as having existing experience, have also completed our own specialist training courses and have access to our technical support. This means that you can be confident of a biomass solution that meets your needs and utilises high-quality, highly-efficient technology across boilers, feed systems and fuel storage solutions. The Registered Installation Network ensures consistent skill levels on a National basis provided by Local contractors with local knowledge.
We have held the exclusive UK market rights, for the last decade, for biomass boilers from two highly-respected Austrian manufacturers – Hargassner and Binder – whose technology has been continuously developed over 30 years. With significant investment in R&D and manufacturing processes, and 100,000 boilers installed worldwide, their products are acknowledged for their high quality, controllability, efficiency and longevity.
Wood Energy can integrate its Wood Pellet, Wood Chip boilers into new developments or existing plant rooms specifically to enable our customers to gain maximum benefit from the Renewable Heat Incentive (RHI). Wood Energy works alongside you to select the right biomass heating design for your applications up to 10MWs, suitable for offices, hospitals, schools, retail, industrial and commercial applications as well as district heating schemes.
Generate your own heat and power from wood fuel: save, earn and reduce your carbon footprint.
Wood Energy in partnership with Binder have developed a range of CHP systems using either ORC (Organic Rankine Cycle) technology utilising HTHW, Hot clean gas or thermal oil and Screw Expanders, utilising steam or low temperature hot water which have the following advantages:
● High Return on Investment
● High efficiency electrical generator producing up to circa 18% electrical output
● Safe environmentally friendly working fluid
● Simple operating procedure
● Automatic and continuous operation
● Simple maintenance procedure
● No operator attendance required (except steam boilers which requires 72hr attendance)
● Long Plant Life (20 years +) complete with 20 year guarantees
● No specialist water treatment required (except steam)
● Operates using standard fuels to EN41961 and doesn’t require specialised difficult to obtain fuels
For all Sales Enquiries please call our Quotation Hotline on
0330 053 7333 (press option 1) or 01454 414139
Address: Energy House, Milbury Heath Road Buckover, South Gloucestershire GL12 8QH
0845 070 7338 or 01454 414139
Monday-Friday: 9:00 — 17:00
It seems the UK is forever experiencing unpredictable weather conditions; a major issue for waste sites up and down the British Isles.
To tackle this, Perth-based Zappshelter have introduced their range to the UK and European waste recycling sector, designed and engineered to withstand the harshest of environments.
Zappshelter products are designed to increase customer storage space and there are sizes available to suit every requirement and budget.
Managing Director Craig Michel said: “We first viewed a similar shelter system in Australia many years ago, and decided to design a product for use in the UK and Europe, which meant extensive structural testing to ensure it was suitable for our climate.
“With the tightening up of waste storage and handling regulations in the industry, our product helps to keep sites in line with the Environment Agency requirements.
“While the Zappshelter concept began with mounting the structure on shipping containers, we also often work with existing material storage bays, or create new ones using our precast concrete bunker wall system.
“Zappshelters are perfect for material processing plants, but we also work extensively with the construction, plant and biomass industries too.”
Zappshelters are available throughout the UK and Europe, with a standard range of 6 metres to 17 metres wide, with lengths in either 6 metres or 12 metres. However, the product design is
flexible and bespoke sizes can be manufactured to suit specific site needs.
Phone: 0208 0505121